What are the precautions in the use of PVC conveyor belts?

With the popularity of conveyor belts in industrial production, conveyor belt variety diversity, high performance, lightweight, multi-functional, long life is the production of several aspects of the attention of the supplier, today I introduce to you in industrial production using conveyor belts a few precautions:

1, to avoid the rollers are covered with material caused by rotary failure, to prevent leakage of card material between the roller and the tape, pay attention to the lubrication of the active part, but shall not be oiled PVC conveyor belt;

2、The roller avoids starting with load;

3、Tape running off, should take corrective measures in time;

4, found that the tape local damage should be repaired in time to avoid expansion;

5, to avoid the tape suffered racks, pillars or block material blockage, to prevent touching broken ripped conveyor belt;

6, PVC conveyor belt type, structure, number of layers should be reasonably selected according to the conditions of use;

7, PVC conveyor belt running speed should not be greater than 2.5 m / s, blocky, abrasive materials should be used fixed force-type unloading device, should try to use low speed;

8, the conveyor's drive roller diameter and conveyor belt fabric layer relationship, drive roller, reversing roller supporting and the angle of the trough requirements should be based on the design of the conveyor, a reasonable selection.